Carbide Tipped Wood Auger Bits – 24″
Carbide-tipped cutting tip combined with a hardened steel cutting edge allows this Auger Bit to bore holes in all types of wood quickly, leaving little or no residue.
Similar to the Eliminator carbide tipped auger bit, these Carbide Tipped Wood Auger Bits leave a clean, smooth hole. Requires less torque to operate and can be used with electric, air, hydraulic or gasoline powered drill motors and impact wrenches. The carbide cutter is brazed onto the steel body and the hardened steel cutting edge can be sharpened. The lead screw, shank, and carbide cutter are replaceable allowing the Auger Bit to be completely rebuilt.
- Carbide tip allows auger to bore holes in hardwood
- Aggressive screw pitch for fast drilling
- Wide flutes assist with maximum chip removal
- 7/16 shank
- Hollow flute style
Carbide Tipped Wood Auger Bits are considered to be a ‘above water level’ bit…go figure. For under water consider the Penetrator.
We carry these up to 1-1/16″ in diameter with the 7/16″ hex shaft…Large diameters are usually special order and have no warranty if used with a 7/16″ hex shank…(in other words, get the 5/8″ hex shank shaft if you have the capability)…Contact Us and we can check availability.
That said we often carry some larger diameters with the 7/16″ hex shank…most users say they have no problems with the 7/16 shank on these shorter lengths
ST0095 – Carbide – 24″