Description

Chainsaw Bar and Cutterless Chain for the Log Wizard

This is a 16″ Chainsaw Bar pre-drilled for attaching to a Log Wizard and the cutterless saw chain.
If you know the ‘pitch, gauge, and Tail/Bar mount’ for your saw you can head straight to ordering, otherwise read on.

To order, you will need the following information:

• Tail Mount Style (sometimes called the ‘Bar Mount’)
  • K095 (Bar #107) is the bar that fits the mid-range Husqvarna saws’…e.g. 257, 261, 262xp, 357, 359, 362, 455, 460, 466…
    
  • D009 (Bar #106) fits the larger Husqvarna saws…e.g. 61, 65, 67, 181, 260, 281, 285, and right on up to the largest (3120xp)…
  • D025 This the bar type that fits the larger Stihl saws…e.g. 024, 026, 028 and larger. (the only anomaly being the 025/ms250 takes a smaller bar mount).
    • (Bar #104 is for the .063 gauge of chain)
    • (Bar #109 is for the .050 gauge of chain)

• Pitch of the chain will be either .325 (74 drive links), or 3/8 pitch (66 drive links). These bars are all have a ‘Solid Tip’…(they don’t have a sprocket tip), The Solid Tip/Hardnose bar fits both 3/8 or .325 pitch chain. Your saw is usually set up for either 3/8 or .325, so ordering the correct chain means you won’t have to change out the sprocket on your chainsaw.
• Gauge of the bar and chain…this is the width of the groove in the bar that the chain rides in. Since you’ll usually be ordering a bar and chain together, you’ll be getting a matched set…e.g. both bar and chain will have a 050 or 063 gauge.
  (Note; The sprocket on the chainsaw and the log wizard work with both).
• NOTE: You can often find this information in your Owner’s Manual or on the chainsaw bar you’re currently using…it’s located on the mounting (tail) end of the bar, hidden by the chainsaw cover plate.
• If you would like to check to see what other makes/models of chainsaws can work with the above bars you can go to WWW.OregonProducts.com. Once there you can put enter the Tail Mount #…e.g. ‘K095 bar’ (then go to the ‘Model Fit List’) , or your make/model and see if any of the bars they offer are identified as having one of the above Tail Mount #’s.
  (an example of this is several Jonsered, Poulan, Echos have a K095 bar mount).

To clarify a bit…both the Log Wizard and your chainsaw need to have the same pitch of sprocket installed…That’s why the Log Wizard comes with both a 325 (usually the installed one), and a 3/8 (in case your saw comes with the 3/8).
Click HERE for a short article on determining the Pitch and Gauge of your chain

ca0030-bar-chain