Sikkens Log and Siding


Cetol Log & Siding

Cetol Log & Siding is a translucent, satin finish for vertical surfaces which offers optimum protection and a premium look using only two coats…sometimes branded ‘Sikkens’ or ‘PPG’


Sikkens Cetol Log & Siding

Sikkens Cetol Log & Siding is a translucent, satin finish for vertical surfaces.
This alkyd high solids formulation (using European alkyd emulsion technology), offers optimum protection and a premium look using only two coats. The two-coat finish creates a protective film, giving the siding a premium look while preserving the natural character and grain of the wood. It is available in a variety of translucent colors.
Several properties of their popular Cetol 1 and Cetol 23+ have been combined and improved upon, allowing Cetol Log & Siding to perform as well or better…and with only 2 coats. (this equates to a big time and labor savings over the traditional 3 coat process of Cetol 1, 23+).

Sikkens Log and Siding conforms to the new 2005 VOC emission standards recently implemented in several states. You’re safe to use Log and Siding in all 50 states. (with the exception of LA, Orange, Riverside, San Bernadino counties in S. California).

Sikkens Log and Siding

  • Coverage:
    Smooth wood 300-400 sq. ft./gallon (8.5 11 sq. m./L)
    Rough wood Approximately half the coverage of smooth wood
  • Number of Coats: 2
  • Application: Use long haired natural bristle brush . Apply first coat to saturation and brush product into surface working out all drips, puddles, or areas of over spray before dry.
  • Wait a minimum of 24 hours prior to applying 2nd coat.
  • Maintenance: Proper maintenance starts with visual inspection. A time frame of 2 to 3 years on the south and west exposures and 3 to 4 years on the north and east exposures can be used as a general guideline. However, as weathering, exposure conditions, and applications can vary widely, maintenance may be needed sooner and should be performed when visually necessary, regardless of time frame. Sikkens Clear Maintenance coat can be used over Log & Siding

* Compatible over existing Cetol 1 and Cetol 23+.

NOTE: If you’re chinking your log home after applying Log and Siding wait a minimum of 4 days in optimum conditions.

Not a stocking item…ships directly from the factory warehouse.

Application Guide

Data Sheet



Log Home Store

What you need to get the job done

Orders: (800) 827-1688 (USA)
Technical or International (503) 843-3608
Fax: (503) 843-3673







Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!