Sikkens
The world's largest coatings manufacturer

The parent company to Sikkens, Akzo Nobel, has been involved in the development and production of a variety of products for home and industry for over 200 years. This experience has led to the creation of some of the best products to help protect and beautify homes and decks all over the world. Sikkens research and development, coupled with leading edge technology, have led to world famous products such as Sikkens Cetol 1 and Cetol 23 Plus - exterior translucent finishes.

Sikkens is a high-solids, film-forming finish, that reduces the environmentally damaging emission of solvent substances found in many other oil (alkyd) finishes.

Cetol is the brand name of Sikkens products that fall into either the Translucent or Clear categories. When you see a product with Cetol on the label, this product will allow you to see all the wood grain and character of the wood (although depending on the product, it may color the wood).

New Cetol products, formulated with proprietary high solids technology, were specially developed to maximize the beauty and longevity of log homes, decks and exterior wood doors and windows. This next generation or "Next Wave" of high solids advancement offers consumers and contractors the beauty and durability they expect from Sikkens with a more simple and quick application. The new-to-North America formulations will provide a range of benefits including beautiful appearance, excellent durability, superior penetration and adhesion, ease of use and clean-up. 

Sikkens is compatible with most quality chinking products and polyurethane or acrylic caulking. (Allow the finish to dry properly prior to applying chinking or caulking).

Note: Logs or wood need a moisture content below 18% to work properly. 

We have available "free" booklets titled, "Sikkens Log Home Application Guide" and "Sikkens Exterior and Interior Protection for Log Structures". (the latter includes a color chart of Cetol 1 colors).

Quantity discounts on 20 or more gallons.  Free shipping after 48 gallons on any Sikkens products--ok to mix and match.

Samples available. Click HERE! 

Cetol Maintenance: A premium colorless, satin, non-pigmented exterior finish to be used as a maintenance coat over existing Cetol 23 Plus or Cetol Log & Siding on siding, logs and trim

High Solids Alkyd with added UV absorbers, will not further darken the wood, excellent microporosity and flexibility

1 coat as needed....see DATA Sheet

NOTE: Restriction List: Due to tightening VOC restrictions in many areas, we can't ship "regular" Cetol 1 in containers larger than a quart to the following areas:
Delaware, District of Columbia, Maryland, Maine, New Hampshire, New Jersey, New Yor, Pennsylvania, Virginia (counties of Arlington, Fairfax, Loudoun, Prince William & Stafford) & (cities of Alexandria;, Fairfax, Falls Church, Manassas & Manassa Park).
For the areas listed above, please specify RE (Reduced Emissions)

Gallon-10 lbs. shipping

5-gallon-50 lbs shipping

Cetol Log & Siding is a translucent, satin finish for vertical surfaces. 
This alkyd high solids formulation (using European alkyd emulsion technology), offers optimum protection and a premium look using only two coats. The two-coat finish creates a protective film, giving the siding a premium look while preserving the natural character and grain of the wood. It is available in a variety of translucent colors.
Several properties of their popular Cetol 1 and Cetol 23+ have been combined and improved upon, allowing Cetol Log & Siding to perform as well or better...and with only 2 coats. (this equates to a big time and labor savings over the traditional 3 coat process of Cetol 1, 23+).

Conforms to the new 2005 VOC emission standards recently implemented in several states. You're safe to use this product in all 50 states. (with the exception of LA, Orange, Riverside, San Bernadino counties in S. California).

• Coverage: 
  Smooth wood � 350-450 sq. ft./gallon (8.5 11 sq. m./L) 
  Rough wood Approximately half the coverage of smooth wood
• Number of Coats: 2
• Application: Use long haired natural bristle brush . Apply first coat to saturation and brush product into surface working out all drips, puddles, or areas of over spray before dry. 
  Wait a minimum of 24 hours prior to applying 2nd coat.
•  Maintenance: Proper maintenance starts with visual inspection. A timeframe of 2 to 3 years on the south and west exposures and 3 to 4 years on the north and east exposures can be used as a general guideline. However, as weathering, exposure conditions, and applications can vary widely, maintenance may be needed sooner and should be performed when visually necessary, regardless of timeframe. Sikkens Clear Maintenance coat can be used over Log & Siding
• Compatible over existing Cetol 1 and Cetol 23+.

Product Data Sheet
Color Guide
Order Samples  

Not available in: LA, Orange, Riverside, San Bernadino counties in S. California).

3 lbs. shipping

Not available in: LA, Orange, Riverside, San Bernadino counties in S. California).

10 lbs. shipping

Not available in: LA, Orange, Riverside, San Bernadino counties in S. California).

47 lbs. shipping

Cetol 1 separates wood from the elements with a durable surface barrier which repels water, while allowing excess moisture to escape thus inhibiting fungal growth. Because the finish "breathes", it allows the logs to regulate moisture content. (see notes above on recommended moisture content). Generally used before Cetol-23 Plus, Cetol 1 penetrates into wood, seals it, and provides a perfect base.

Maintenance: On homes, a maintenance coat using Cetol 23+ should be applied approximately every 4-5 years on most walls and 3 years on your "weather" side.  We've had people tell us "I haven't done anything in over 8 years and it still looks great" but please, don't wait that long!   You want your finish to stay in great shape--not wait until it degrades which gives you MUCH more work to do.  Before applying the maintenance coat, follow the maintenance preparation procedures discussed in the application guide which you'll get with your purchase.
     For fences and outdoor furniture, recoat with Cetol 1 as visually necessary--usually every 1-2 years.

Usage: Siding, trim, doors, garage doors, windows, logs, outdoor furniture, fences
Features: Superior UV protection, highly transparent, water repellent, weather resistant, flexible, breathable.
Application: Long-haired, natural bristle brush or spray. Strongly recommended that you brush on the first coat.  Touch dry after 4-6 hours and recoatable after 24 hours depending on weather conditions, usually 20 C (68 F) and 65% relative humidity. At temperatures below 10 C (50 F) or conditions of high humidity, the drying will be slowed.

Coverage: 
Cetol 1 (for rough or old Wood) 200-300 sq. ft./US gallon
Cetol 1 (for smooth or new wood) 250-350 sq. ft./US gallon

Note: For outdoor furniture and fences use 3 coats of Cetol 1 without a top coat of Cetol 23+.  

NOTE: Restriction List: Due to tightening VOC restrictions in many areas, we can't ship "regular" Cetol 1 in containers larger than a quart to the following areas:
Delaware, District of Columbia, Maryland, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia (counties of Arlington, Fairfax, Loudoun, Prince William & Stafford) & (cities of Alexandria;, Fairfax, Falls Church, Manassas & Manassa Park).
For the areas listed above, please specify RE (Reduced Emissions)
Additionally; For California.."Regular" (any size), is available in the following counties...Alpine, Amador, Calaveras, Del Norte, Glen, Humboldt, Inyo, Lake, Lassen, Mariposa, Mendocino, Modoc,  Mono, Nevada, Plumas, Sierra, Siskiyou, Tuolumne, Trinity. We can ship only quarts into the other counties.

Quarts are available in all areas of the United States...go figure.

Click HERE for color Chart

Samples available. Click HERE! 

Quart size containers are available for shipment to all 50 states.

Click HERE for color Chart

Please review restriction list above.

Click HERE for color Chart

Please review restriction list above.

Click HERE for color Chart

Note: This is the topcoat for Cetol 1.

Maintenance: See Cetol 1 (above) for maintenance recommendation.

Usage: Siding, trim, doors, garage doors, windows, logs
Features: Superior UV protection, highly transparent, water repellent, weather resistant, flexible, breathable.
Application: Long-haired, natural bristle brush or spray. Touch dry after 4-6 hours and recoatable after 24 hours depending on weather conditions, usually 20 C (68 F) and 65% relative humidity. At temperatures below 10 C (50 F) or conditions of high humidity, the drying will be slowed.

Coverage: 400-500 sq. ft./US gallon

NOTE: Restriction List: Due to tightening VOC restrictions in many areas, we can't ship "regular" Cetol 1 in containers larger than a quart to the following areas:
Delaware, District of Columbia, Maryland, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia (counties of Arlington, Fairfax, Loudoun, Prince William & Stafford) & (cities of Alexandria;, Fairfax, Falls Church, Manassas & Manassa Park).
For the areas listed above, please specify RE (Reduced Emissions)
Additionally; For California.."Regular" (any size), is available in the following counties...Alpine, Amador, Calaveras, Del Norte, Glen, Humboldt, Inyo, Lake, Lassen, Mariposa, Mendocino, Modoc,  Mono, Nevada, Plumas, Sierra, Siskiyou, Tuolumne, Trinity. We can ship only quarts into the other counties.

Quarts are available in all areas of the United States...go figure.

Click HERE for color Chart

Samples available. Click HERE! 

Quart size containers are available for shipment to all 50 states.

Click HERE for color Chart

Please review restriction list above.

Click HERE for color Chart

Please review restriction list above.

Click HERE for color Chart

SRD is an easy to use, translucent water repellent exterior wood finish for log siding, roofs, and decks. This one coat system incorporates finely ground transparent iron oxide pigments that result in a rich, natural and uniform coloration of the wood surface, while offering protection from moisture and UV damage. As Cetol SRD is easy to use, it's the ideal choice for demanding areas where more frequent maintenance may be necessary. One-coat application, water repellent, UV protection. Cetol SRD is for application to areas normally troublesome to
coat with film-forming products.  Non film building.  Has fungicide to help prevent mold growth.

Note: If the surface does not have an even appearance (around knot areas, etc.), a second thin coat may be applied to even out the color.

Maintenance: A maintenance coat using Cetol SRD should be applied when visually necessary to help maintain its protective characteristics. Before applying the maintenance coat, follow the maintenance preparation procedures.

Usage: Siding, trim, outdoor furniture, fences, log homes and log siding, roof shakes and shingles, decks, docks, composite wood. 
Features: One coat gives a matt, non-film forming, translucent wood finish...all blends.
 (California "250" blend can also be applied as 3 coats on vertical surfaces to get a satin sheen...24 hours between coats).
Application: Garden pump sprayer, long-haired natural bristle brush, airless sprayer or roller. All methods must be back brushed using a good quality long hair natural brush. In the case of shakes & shingles, dipping is recommended, then brushing any excess drops until smooth.
Coverage:
(for rough or old Wood) 100-150 sq. ft./US gallon
(for smooth or new Wood) 200-300 sq. ft./US gallon

Additional information on SHAKE & SHINGLE APPLICATION
High levels of humidity and moisture exist in roof shakes and shingles due to the
many end grains and horizontal surfaces involved. All end grains must be heavily
coated to avoid moisture uptake into the wood.
Cetol SRD may be sprayed on in the case of roof shingles and shakes. Apply
enough material to get an even appearance of the coating. Brush out any runs
immediately to avoid lapmarks and drips. For best results, shakes and shingles
should be individually dipped. To do so, immerse them in Cetol SRD, let the excess
drip off or brush out, then lay out to dry for a minimum of 16 hours. Once dry,
shakes/shingles can be installed.

Click HERE for color Chart

Click HERE for additional SRD Data.

Samples available. Click HERE! 

 

NOTE: Restriction List: Due to tightening VOC restrictions in many areas, we can't ship "regular" Cetol SRD to the following areas:
Delaware, District of Columbia, Maryland, Maine, New Hampshire, New Jersey, New Yor, Pennsylvania, Virginia (counties of Arlington, Fairfax, Loudoun, Prince William & Stafford) & (cities of Alexandria;, Fairfax, Falls Church, Manassas & Manassa Park).
For the areas listed above, please specify RE (Reduced Emissions).
For California, the following applies:
Order "Regular" for the following counties: ...Alpine, Amador, Calaveras, Del Norte, Glen, Humboldt, Inyo, Lake, Lassen, Mariposa, Mendocino, Modoc,  Mono, Nevada, Plumas, Sierra, Siskiyou, Tuolumne, Trinity.
For all other California counties order Formula 250...(primarily the Southern half of the state and up the center portion thru Shasta).

Please review restriction list above.

Click HERE for color Chart

Please review restriction list above.

Click HERE for color Chart

For use on exterior doors, garage doors, and windows. 
Incredibly durable finish that brings out the natural beauty of your wood.

Doors & Windows
Entrance and garage doors as well as windows have a unique problem in that they
have many joints and seams; therefore, a lot of open-end grains. If not properly
treated, this could cause coating failure due to excess moisture intake. Additionally,
the temperature difference that exists between the interior and exterior can cause
moisture transport, which may lead to problems. To reduce or eliminate the possibility
of coating failure in these situations, some simple procedures should be
adhered to. Doors should be coated on all sides including the top and bottom.
Windows should be coated well on the interior surface as well as the exterior.
If possible, coat the outside frame structure of the window. Garage doors should
be coated on the bottom and top of the door, replacing hardware only after the
coating is dry. Where there are holes or areas where the joinery meets, saturate
heavily with the coating and, where necessary, fill with a good quality polyurethane
or acrylic-based caulking.

Note: Do not use Door & Window Clear by itself on any heavily exposed areas
(south and west). A base coat of Cetol 1, or a base coat of Door and Window color (available only in quarts), is necessary for proper UV protection.

Maintenance: A maintenance coat of Door and Window Clear every two (2) to three (3) years on the south & west-facing sides or heavily exposed areas. Reapply every three (3) to four (4) years on the north & east sides. Before applying the maintenance coat, follow the maintenance preparation procedures.

Usage: Exterior doors, including garage doors, window frames 
Features: Water-clear finish, quick drying, washable, non-yellowing
Application: Verify moisture content below 18%. Use good quality longhaired, natural bristle brush. Can recoat after 24 hours. Sand with 220-320 grit sandpaper between coats.
Coverage: 350-450 sq. ft./US gallon (smooth wood)

NOTE: Colors are only available in quarts.
Alternately use Cetol 1 as the base color.

Log Decor is a protective translucent satin finish that provides color and finish in one product for interior wood surfaces. 
The waterborne finish accentuates the natural grain and texture of all types of wood.
Urethane fortified acrylic formula which is non-yellowing, low-odor, scratch-resistant, and easy to clean. 

Usage: Interior Logs, Paneling, Doors, Furniture, Window frames.
Features: quick drying, washable, non-yellowing
Application: Use good quality longhaired, nylon-polyester brush or synthetic pad applicator or spray. Can recoat after 4 hours. Sand with 220-320 grit sandpaper between coats.
Coverage: 400-500 sq. ft./US gallon (smooth wood)
Click HERE for color Chart
       
Samples available. Click HERE! 

Clear waterborne coating that gives a durable finish to all interior woodwork. Scratch resistant finish, quick-drying, low-odor, easy clean-up, transparent satin finish.

Usage: Doors, trim, molding, window frames, cabinets, ceilings, walls, logs, furniture, kitchen and bathroom walls, paneling, baseboards. 
NOTE: If using on floors, apply 4 coats minimum and don't use a roller...you'll get an orange peel type surface that's hard to clean.
Features: Water-clear finish, quick drying, washable, non-yellowing
Application: Use in areas needing high resistance to wear and tear. 
Can be used as top coat. 
Apply 1-3 coats using nylon-polyester brush. 
You can dilute first coat on bare wood with up to 10% water for better flow. 
Allow 4 hours between coats then sand with 220-320 grit sandpaper. 
Vacuum to remove dust and wipe down with damp cloth prior to subsequent coats. 
3rd coat only needed in high-wear areas.
Coverage: 400-500 sq. ft./US gallon (smooth wood)

Solvent borne, transparent topcoat...
Clear oil based coating that gives a durable finish to all interior woodwork. Scratch resistant finish, quick-drying, low-odor, easy clean-up, transparent satin finish.

Usage: Recommended only for high humidity areas such as unventilated bathrooms and kitchens.
Doors, trim, molding, window frames, cabinets, ceilings, walls, logs, furniture, kitchen and bathroom walls, paneling, baseboards. 
Features: Clear finish, quick drying, washable, non-yellowing
Application: Use in areas needing high resistance to wear and tear. 
Can be used as top coat. 
Apply 1-3 coats using nylon-polyester brush. 
You can dilute first coat on bare wood with up to 10% water for better flow. 
Allow 4 hours between coats then sand with 220-320 grit sandpaper. 
Vacuum to remove dust and wipe down with damp cloth prior to subsequent coats. 
3rd coat only needed in high-wear areas.
Coverage: 400-500 sq. ft./US gallon (smooth wood)

NOTE: Restriction List: Due to tightening VOC restrictions in many areas, we can't ship Cetol Interior Oil (solvent) based in containers larger than a quart to the following areas:
Delaware, District of Columbia, Maryland, Maine, New Hampshire, New Jersey, New Yor, Pennsylvania, Virginia (counties of Arlington, Fairfax, Loudoun, Prince William & Stafford) & (cities of Alexandria;, Fairfax, Falls Church, Manassas & Manassa Park).

Waterborne formula for interior woods. Clear matte finish with a special UV inhibitor to retard the yellowing effects of UV rays. Ideally suited for light colored woods such as pine where you have large windows letting in lots of sunlight.  Matte finish.  For use on bare wood only.

Usage: Ceiling, walls, logs, saunas (dry), wood paneling
Features: Non-yellowing, washable, quick drying
Application: Apply 2 coats using nylon-polyester brush. Allow 2 hours drying time between coats. Lightly sand after 1st coat with 280-320 sandpaper then vacuum the surface to remove sanding dust and wipe surface with damp cloth.
Coverage: 450-550 sq. ft./US gallon (smooth wood)