S100 Finish remover and stripper

Details

crp0001-s100

S-100 Finish Remover is an environmentally friendly water-based solvent that removes most oil based finishes and some water-borne (acrylic) finishes from logs, siding, and decks.s...using new technology originally developed for removing paint from aluminum aircraft surfaces.

Supplied as a ready-to-use gel, it is easily applied with a short bristled brush, paint roller, or airless sprayer. Within a few minutes it begins to soften the finish and since it is a gel, it stays wet and active for a fairly long period of time. Once the finish has sufficiently softened, it can be removed by simply pressure washing.

• S-100 will not darken or discolor the wood, will not corrode or discolor metal surfaces, nor will it harm log home chinking or sealants.
• Removes most finishes from logs, siding and deck surfaces (there are some high performance coatings that may require a more aggressive chemical stripper).
• Will not harm chinking and sealants
• Will not corrode or discolor aluminum or other metalsIs
• Environmentally friendly...biodegradable means no concens about contaminating the surrounding soil.
• Will not darken or discolor wood
• High solubility of S-100 makes it easy to clean up.
• pH neutral, thus no neutralizer needed

Application rate is between 50 and 100 square feet per gallon.

Use 'Smart Strip' Professional Grade Finish Remover for more difficult finishes e.g. nautical paints, and water (acrylic) based finish.

NOTE: S-100 Finish Remover is not recommended for removing lead-based paint or paint that was applied before 1972

Application rate is between 50 and 100 square feet per gallon.

Photos

Click on photo to enlarge

Extras

S-100 label (pdf)

S-100 MSDS (pdf)