Followplate to fit straight sided plastic buckets

Details

cc0003-straight

Fits inside bucket. Speeds bulk loading.

Sheet metal, no seal, 10 7/8" diameter

Use this type for:

• Sashco Log Jam
• Sashco Log Builder

DIRECTIONS:

• open pail and place Follow Plate directly on top of material (after mixing, if necessary).
• Press it down firmly to eliminate air pockets.
• Remove front cap from gun and advance the rod as far forward as it will go.
• Thread the gun into the Plate.
• While exerting pressure down onto the plate, pull back on the rod to fill the gun.
• When full, unthread the gun and replace the cap and nozzle on the gun.
• Cover the opening on the follow plate with a piece of plastic to limit curing between fills.