Penetreat Borates

Details

crp0030pt

PeneTreatTM, a borate-based wood preservative, forms a shell of protection to defend against rot, most wood-destroying insects and fungi.

PeneTreatTM is a powder that is mixed with water and then applied with a brush or sprayed on with a garden sprayer.

• It is also EPA-approved. PeneTreatTM will not effect the color of wood, interfere with stain or caulk adhesion
• Completely odorless.
• Low cost and easy application make PeneTreatTM the popular choice.
  
  Can be applied by brushing, spraying, dipping, kerf-flooding, or hole flooding. Mix 1 loosely packed quart, (1 lb.), of powder to 1 gallon of water. Apply at rate of 1 liquid gallon per 150 sf of surface area. Remember apply a second coat 4-24 hours later. Saturate all up-facing checks and cut ends of wood.

Two sizes available.

• 3-1/2 gallon: Yields 15+ gallons of 10% solution.
  Coverage 1125 s.f. of surface area
• 6 gallon: Yields 27+ gallons of 10% solution.
  Coverage 2025 s.f. of surface area.
  
   Estimated yields are based on two coats of product.
   

Extras

MSDS (pdf)

Technical data sheet (pdf)